Table of Contents
Kiss DP-1500
<note important> No more updates - I don't have this player any more </note>
Software Information
- Product name: KiSS DP-1500s
- Firmware version: v. 2.8.5 (now 2.9.3)
- Loader version: v 1.2.8 (now 1.3.1)
- Built by: fk on 16:38:13 Mar 1 2004 (fk on 13:35:30 Jun 4 2005)
Hardware Information
- Mainboard revision: E2 4MB Flash
- Drive name: [DVS-K] DVS-LDR DSL-710A LT7A
- CPU speed: 198 MHz
- Princeton PT6311 VFD Driver IC - datasheet
Codes
- Reset settings: open - del - 1 - 2 - 3
- System menu: open - del - 2 - 7 - 6
Boot Messages
<4>Linux version 2.4.17-uc0 (fk@fk-bsd) (gcc version 2.95.3 20010315 (release)) #150 Sun Jun 5 14:22:49 CEST 2005 <4>Processor: ARM pt110 revision 0 <4>Architecture: JASPER1/2 <4>Jasper1 rev.B CPU 198 Mhz <4>On node 0 totalpages: 2560 <4>zone(0): 2560 pages. <4>zone(1): 0 pages. <4>zone(2): 0 pages. <4>Kernel command line: root=/dev/root <4>setup_timer: Timer value = 61875 <4>serial_jasper: setup_console @ 115200 <4>jasperuart change speed 53 <4>Calibrating delay loop... 98.71 BogoMIPS <6>Memory: 10MB = 10MB total <5>Memory: 8764KB available (1044K code, 177K data, 48K init) <4>Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) <4>Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) <4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) <4>Page-cache hash table entries: 4096 (order: 2, 16384 bytes) <4>POSIX conformance testing by UNIFIX <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>sk_init: wmem_max 32767 default 32767, rmem_max 32767 default 32767 <4>Initializing RT netlink socket <4>Starting kswapd <4>devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au) <4>devfs: boot_options: 0x1 <5>udf: registering filesystem <4>pty: 256 Unix98 ptys configured <4>block: 64 slots per queue, batch=16 <4>RAMDISK driver initialized: 1 RAM disks of 128K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx <4>JASPER ide controller activated <4> ide0: BM-DMA at 0x500e00-0x500e0f, BIOS settings: hda:pio, hdb:pio <4>hda: [DVS-K] DVS-LDR DSL-710A 031217A0, ATAPI CD/DVD-ROM drive <4>hdb: TOSHIBA MK4025GAS, ATA DISK drive <4>ide0 at 0x500bf0-0x500bf7,0x500be6 on irq 11 <4>hdb: ignore DMA off message. <4>model = TOSHIBA MK4025GAS <4>firmware version = KA100A <4>jasper_config_drive_for_dma: <4> capability = 0x002f <4> field_valid = 0x0007 <4> dma_ultra = 0x003f <4> dma_1word (s) = 0x0007 <4> dma_mword (m) = 0x0407 <4> autodma = 0x0001 <4>jasper_tune_chipset: speed = 22 <6>hdb: 78140160 sectors (40008 MB), CHS=77520/16/63, (U)DMA <4>hda: ignore DMA off message. <4>model = [DVS-K] DVS-LDR DSL-710A 031217A0 <4>firmware version = LT7A <4>jasper_config_drive_for_dma: <4> capability = 0x000b <4> field_valid = 0x0006 <4> dma_ultra = 0x0107 <4> dma_1word (s) = 0x0000 <4> dma_mword (m) = 0x0407 <4> autodma = 0x0001 <4>jasper_tune_chipset: speed = 22 <4>hda: ATAPI 8X DVD-ROM drive, 512kB Cache, (U)DMA <6>Uniform CD-ROM driver Revision: 3.12 <6>Partition check: <6> /dev/ide/host0/bus0/target1/lun0: p1 p2 <4><DM9000> iobase=2300 - id_val: 0x90000a46 <4><DM9000> I/O: 2300, VID: 90000a46 <4><DM9000> iobase=2300 - mac address swaped 00:d0:e0:90:ed:67 <4>Blkmem copyright 1998,1999 D. Jeff Dionne <4>Blkmem copyright 1998 Kenneth Albanowski <4>Blkmem 1 disk images: <4>0: 6000-3CE7FF [VIRTUAL 6000-3CE7FF] (RO) <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>IP: routing cache hash table of 512 buckets, 4Kbytes <4>TCP: Hash tables configured (established 512 bind 512) <4>Making root root <4>VFS: Mounted root (romfs filesystem) readonly. <4>Mounted devfs on /dev <4>Freeing init memory: 48K <4>serial_core: try baudrate 115200 <4>jasperuart change speed 52 <4>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended <4>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended <6>Linux Kernel Card Services 3.1.22 <6> options: none <6>JASPER PCMCIA (CS release 3.1.22) <7>VFS: Disk change detected on device ide0(3,0)
Filesystem
/dev/root on / type romfs (ro) none on /dev type devfs (rw) /dev/rd/0 on /tmp type ext2 (rw) /proc on /proc type proc (rw,nosuid,nodev) /dev/discs/disc0/part1 on /systempart type ext2 (rw) /dev/discs/disc0/part2 on /hdd type ext2 (rw) Filesystem 1k-blocks Used Available Use% Mounted on /dev/root 3874 3874 0 100% / /dev/rd/0 121 14 101 12% /tmp /dev/discs/disc0/part1 488006 13 462795 0% /systempart /dev/discs/disc0/part2 38562348 20 36634024 0% /hdd
Links
